11/02 Blue sheet is online


Pallet Rack
Teardrop                                       300 uprights 25’x36”  $50        112 uprights 18’x36”  3x3 $35                                       116 uprights 22’x36”  3x3 $45                                      3175 Beams 96”x5” $12           440 Beams 60”x5” $8      
     Sturdibilt for bid                            849 Uprights 22”x36”  $45      1254 Uprights 20”x36”  $40   5408 Beams 96”x5” $9          9602 Beams 96”x5” Bid $9 

10000+ bays of 5 deep push back $55 per  
120 42 x 16' and 96 of a 44 x 16'frames 1600 96" beams with a 3" face and 100 with a 3 1/2" face and 800 96" 4" face and all the wire deck to fit                 

650 Myrack uprights 300 Uprights   42" deep x 26' tall  3x3             2000 Beams   96" long x 4 1/4" tall   $45k

500 - Structural C3 Upright 26' x 42” .......[$ 69.00]
4800 - Structural C3 Beam 96" (4,600#) ....[$ 10.00]                               
Conveyor
16000’ of Rapistan 1265 es new still in factory crates. 36”  $25 pf
Gen 3 over 20 lane bi-directional in great condition $75k
3920’ of gravity conveyor in great condition 18” and 24” $25k
8150’ of powered Automotion 3 full systems with current service maintained 24”  $20 pf
Matthews P-33 sorter Bi-directional with 40 lanes $35k
Pick module conveyor powered accumulator with gravity wings  24”
Better than new conveyor
1. 36"x60' (40'/20' fold) radial stackers with wheels - $22,000 CAD or $20,000 USD
2. 36"x50' (40'/10' fold) radial stackers with wheels - $21,000 CAD or $19,000 USD
3. 36"x50' (40'/10' fold) stationary stackers - $12,500 USD
18” line-shaft, 7 truck loads , scrap priced                                                                                                                                                  All Other
 1310  Carton flow shelves 60”wx 15’d   $50 fames $45
 48 bays of 96”wx15’d Carton flow shelves $60
 660 Units of Inter-royal Shelving with 7 levels and 18x36 hd shelving on clips with hard sides  $45
 20 Office cubicles by Steel-Case. With wrap desk, files High and low and Chairs (over $500 new) The whole lot is offer at $7000
 10 Islile Work Stations 30 deep 30 tall and 5 ‘wide. With riser and electric  some have lighting .  $150 each $1400 for all
4 xii Zebra printers
 2 Side grip conveyors with twin drives.  w/mounted LSI print heads$2500 ea 2 Mark-Em 300 LH  $3000 ea
3—raymond carousels 48’x 10’ with all the bells 35k New looking
Forklifts—call or email for list.

Needed

Pallet Rack
160 bays of 16’ tall 44-48 deep with 900 96” beams (light duty) and decks.
220 ea. 42" x 144"h teardrop 3x3 Upright 1092 ea. 144" x 6” (~6,000# cap) 1638 ea. wire deck 42" x 46"
300 beams Only 96x 7000 lbs quick ship offers only
202 uprights 192x42 1280 beams 108x5000lbs
1200 light duty 144s new style Interlake

Conveyor
20 powered bestflex conveyors 24”x24’
50’ of Accumulation Pallet Conveyor 48-50” 2500lbs
300 feet of 24” with 3 drives and 2 180 curves and two pop wheels
Looking for dealers to sell new conveyor from china
4 level 20+ bay pallet flow module.
Glaypacs or other extenders in and out loader 24” x50’ (3) units.

Other Equipment
Chilled over wrapper for Oreo size cookie. 50 a min
1- 50 hp compressor
12 Raymond or remstar carousel horz 50 to 70 long
42 bays of carton flow 8 wide by 6 deep. 3 to 4 shelf.


 Hot offers

Mezzanines
200' x 150' x 14' High Mezzanine / $5.00-$7.50 per SF / FOB: South Carolina
60' x 200' 2-Level Mezzanine (plus floor) / $5.00-$7.50 per SF / FOB: South Carolina

Pallet Rack
40' x 42" x 96" x C4 Structural / 1,200 Bays x 8 Levels / $19-$23 per PP / FOB: Connecticut
35' x 48" x 96" x 5" Slotted / 150 Bays x 7 Levels / $13-$16 per PP / FOB: Pennsylvania
35' x 42" x 96" x 4" Teardrop (Seismic) / 330 Bays x 5 Levels / $16-$19 per PP / FOB: Kentucky
26' x 42" x 96" x C3 Structural / 500 Bays x 5 Levels / $15-$18 per PP / FOB: Indiana
22' x 36" x 138" x 4.5" Teardrop / 2,200 Bays x 3 Levels / $8-$12 per PP / FOB: South Carolina
22' x 42" x 96" x 4" Teardrop / 450 Bays x 3 Levels / $12-$15 per PP / FOB: Kentucky
18' x 48" x 96" x 3" Keystone / 180 Bays x 5 Levels / $9-$12 per PP / FOB: North Carolina

Conveyor
2000' x 30" Power Rapistan / Live Roller, Incline, Curves / $15-$25 per Ft / FOB: Kentucky
1500' x 24" Power Automotion / 1.9" Accumulation at 30" zones / $20-$30 per Ft / FOB: Connecticut 2000' x 18" Power Metzgar / 1.3" Line Shaft on 3" center / $8-$10 per Ft / FOB: North Carolina
2300' x 18" Gravity / 1.3" Roller on 4.5" center / $4-$6 per Ft / FOB: Kentucky

Pick Modules
3 Level x 2-Deep Pallet Flow / 288 Pallet Faces / $50 per PP / FOB: South Carolina
3 Level Carton Flow Pick Module / 8'x8' Shelves / call for price / FOB: Tennessee
2 Level Carton Flow Pick Module / 12'x5' Shelves / call for price / FOB: Georgia
 
Interlake new style
1405 – uprights 48’’ x 35’ x 3’’x3’’ post    @ 85.00 ea 
573 – uprights  48’’ x 22’ x 3’’ x3’’ post  @ 65.00 ea.
32,000 – beams 117’’ x 3’’  1400 lbs cap   and  3-3/8’’  2400 lbs cap  @  7.00 ea 
Wire deck 48’’ x 56’’   - 3 channel  @ 7.00 ea 
Interlake bulk shelving
1000 – sections   24’’ deep x 96’’ wide w/ wire deck 4 shelves   @  60.00  per section
2 – big ass fanes   @  800.00  ea 
3 – bailers
5000 – ft conveyor 
66000 sq ft mezzanine   3.00 per sq ft
Pallet rack supported   
AVAILABLE  NOVEMBER 1ST (great looking call sam at 501-231-2896

Dealer says move it.          Teardrop  36  18' x 42" NY 161   18' x 42"                         321          16' x 42"          14'-16'       26         18' x 42"          ( 3" x 3")  16           20' x 48"                           46          8' x 48"                   56            8' x 48"                     13                9' x 42"    ( 3" x 3)    24                8' x 36"                       3                1051/2" x 42"       ( 3" x 3")                               6          106" x 48"          ( 3" x 3")                     4                  11' x 42" ( 3" x 3")  21                12' x 42" ( 3" x 3")     10                12' x 42"                    6                12' x 48" ( 3" x 3")      2                14' x 42" ( 3" x 3")     22 16' x 42" ( 3" x 15/8")22 16' x 42" ( 3" x 3")Structural                              33 16' x 42" ( 3" x 21/2")72 18' x 44" ( 3" x 21/2")22 18' x 44" ( 3" x 3") Interlake                                                      700       18' x 42"                       Keystone                              110 24' x 42"                   56 24' x 42",48",30"    22 24' x 30"                 fob  NY
Manufacture:                Henges  Install Date:                  2000 Size:                             19200 Sq feet Dimensions:                  120 ft X 160 ft Weight Load:                200 PSF seismic zone 1   Column space:          20’ X 30’ Column foot plate:   16” X 16” Under clearance:       12’     Top of Deck (TOD)     14’-8 ¼” Construction: Pre engineered bolt together. Steel I-Beams and open web bar joist. Decking corrugated 1-1/2” X 20 gage roof deck and ¾” T&G OSB With 3 rail hand rail all for sides. With 4 external stairways at each corner.             He also has 850’ of Rapistan 1265 conveyor 36” with 8 drives  Call your rep


Count                               Description                     
Condition                        Cost
Teardrop
2500           3.5" x 96" Orange Prest Rack Teardrop Step Beams                    
9.5               $13.75
500             3.75" x 96" Orange Prest Rack Teardrop Step Beams
9.5               $14.00
1000           4" x 96" Orange Cardinal Rack Teardrop Step Beams
9                   $14.50
200             4" x 96" Orange Interlake Rack Teardrop Step Beams
8                   $14.50
150             5" x 102" Grey Interlake Teardrop Step Beams
7                   $15.00
160             4 x 108" Green Interlake Teardrop Step Beams
8                   $16.00
400 3" x 120" Orange Teardrop Step Beams
9 $15.00
7000 3-3.4" x 144" Orange Interlake Teardrop Step Beams
9 $18.00
200 6" x 144" Orange Teardrop Step Beams
8.5 $25.00
500 5" x 168" Orange Teardrop Step Beams
9 $25.00

Teardrop
30                42" x 120" Grey Teardrop Uprights 3" x 1-5/8"     8                $35.00
25                42" x 144" Green Teardrop Uprights 3" x 1-5/8"    8                 $42.00
60                42" x 168" Green Interlake New Style Teardrop Uprights 3" x 1-5/8"     8.5               $45.00
60                42" x 204" Green Teardrop Uprights 3" x 1-5/8"     8.5            $55.00
500             42" x 216" Green Interlake New Style Teardrop Uprights     9                     $55.00
100             42" x 264" Green Interlake Old Style Teardrop Uprights     9  $60.00
10                44" x 216 "Tan Teardrop Uprights 3" x 3" Column     7         $55.00
60                48" x 168" Green New Style Interlake 3" x 1-5/8" Column     7.5                     $48.00
350             48" x 228" Blue Teardrop Uprights 3" x 3" Column     8.5     $85.00

Single & Double Cantilever Rack 18' x 48" Arms                                                                                            (50) Cantilever Vertical 18' (23,800# cap) [ $75.00 ]                                                                        (50) Double Cantilever Base 106" [ $56.00 ]                                                      (400) Straight Arm 48" (2,060# cap) [ $7.50 ]                                                     (71) 84" Horizontal X-brace [ $12.00 ]                                                                     (highest offer will be considered)   (situation is "take-all" only) (FOB:



90 Uprights 48" X 192" X 3" X 3" Tear drop Color Orange Each $ 45.00
60 42"Deep16'tall uprights 3x3 Color Orange  Each $ 45.00
600 beams 96 by 5000 lbs Color Grey Each $ 8.00500 Beams 102" X 4 1/2" Color Blue  Each $ 8.50
400 Beams 99" X 4 3/4" Color Orange  Each $ 8.25
All wire decking $8.50 FOB TX

200 - 42" x 18' x 3x3 Teardrop Uprights  FOB  KY   $ 35.00
277-3” x 42” x 300” @$75.00ea
1472-4” x 96” beams @$12.00ea
1172-3” x 96” beams @ $10.00ea
2624-decks 42”x46”@$7.50ea
64-6” x 144” beams @$15.00ea
18-54” x 20’ X 3” structural uprights@$50.00ea All material is Frasier structural f.o.b. Newark nj

Compressor system

2 each Screw Operating Systems Model SET150740 44.1 CFM @ 100PSI  460 VAC 3 Phase
With Dryer and 100Gal Tank  Manufactured 2005   System shut down Feb 2009 Offers accepted   Asking 35k






Robotic Arm used as a Box Opening Machine  

Toshiba SR 1054HSP
$20,000
Purchased new for $65,000.00 Used 1 week



Current market rates run higher in large cites and a little less in rural areas. This should just be a guide to establish budgets for projects. You can add it up by the part to come up with a workable number.
These numbers only reflect the mechanical cost.

Pallet Rack
Uprights 10 to 18 each
Beams 2 to 3.50 each        
Wire decks 1 to 2.5
Back supports 2 to 3.5 each
Conveyor
Power 8 to 12 per foot
Gravity 3 to 5 per foot
Shelving 10 to 20 per unit
Carton flow 30 to 50 per bay
Cubicles 75 to 100 per set
These rates include all cost associated with the mechanical install  or de-stall of this equipment. Your rate may vary based on you project needs.   Call Quincy Randolph
678-656-3966





 

We are looking for Pallet Rack

This area is where we post want ads for rack as soon as they come in.
call 501-231-2896 for more info on what we are looking for
Thank you Sam

Used Teardrop Pallet Rack
202 Upright - 192"H x 42"D, 3"x3"x13 GA (25,000# cap)
1,280 Beam - 108"L x 4.5" (5,000#/pair Cap)
48 Beam - 120"L x 5"D (5,000#/pair Cap)
202 Row spacer, 12"L
1,292 Wire mesh deck, 42"D x 52"W (2500# cap)
40 Wire mesh deck, 42"D x 58"W (2500# cap)
46 DBL - End of Aisle Guard - 96"L
2 SGL - End of Aisle Guard - 42" RH(1)/LH(1)
North central us

I need the following:
2000 stacking frames for a 40x48x 60” high load.
Wt. 2500# Preferrably Tier-Rack to attach to the pallet.
1000 Frames 42” x 20’
6000 Beams 4” x 96” w/decks
North east us

I need 2000 beams for west coast size
is 144" x 4" for frazier structural.


160 bays of 16’ tall 44-48 deep with 1060 96” beams (light duty) and decks. 
220 ea. 42" x 144"h teardrop 3x3 Upright 1092 ea. 144" x 6” (~6,000# cap) 1638 ea. wire deck 42" x 46"
300 beams Only 96x 7000 lbs quick ship offers only
202 uprights 192x42 1280 beams 108x5000lbs












Great conveyor system offerings from Chicago dealer inventory


Call Sam for updates or pics. at 501-231-2896 or samdkelley@gmail.com
These units are offered by a very good dealer in the Chicago area.

FKI Unisort XV



Installed 2006

36” Infeed Conveyor – 44” Effective Width

375 FPM - 15 HP End Drive - 153’-0” Long

11 Discharges to the Right - 11 Skatewheel Sweeps

________________________________________________________________________________________________________________

Transnorm Merge with Verti-Belts



Installed 2006

13’-6” Wide x 22’-6” Long

3 to 1 Merge 36” Nominal Width System

350 FPM

3 HP Drive

(2) Verti-Belt Units – 1 HP Each 361 FPM – With Verti-Belt Support Structure


Additional Pictures Available Upon Request **** Call For PricingDematic – RS-200



Installed 2000 – Upgrade 2007

24” Infeed

240 FPM - 25 HP End Drive - 400’-0” Long

25 Discharges to the Right - 25 Skatewheel Sweeps

Complete with Maintenance Manuals

__________________________________________________________________________________________________________

Dematic - 1265 Accumulation – Belt Declines



Installed 2000 - 2007

24” Wide

Dematic 1265 Accumulation – 3” roller centers - 24” light weight sensing zones

500’ (12) 2 HP Drives

(25) Belt Declines from 18’-0” elevation to 48” elevation


Additional Pictures Available Upon Request **** Call For Pricin
Automotion Pusher Sorter



30” Infeed

180 FPM - 10 HP End Drive - 192’-0” Long – 36” Wide

15 Right Angle Pushers for 36” Wide Unit

(1) Brake Spacer Induction – 30” Wide

Great offerings from around the country

Mezzanines   200' x 150' x 14' High Mezzanine / $5.00-$7.50 per SF / FOB: South Carolina
60' x 200' 2-Level Mezzanine (plus floor) / $5.00-$7.50 per SF / FOB: South Carolina
Pallet Rack      40' x 42" x 96" x C4 Structural / 1,200 Bays x 8 Levels / $19-$23 per PP / FOB: Connecticut
35' x 48" x 96" x 5" Slotted / 150 Bays x 7 Levels / $13-$16 per PP / FOB: Pennsylvania
35' x 42" x 96" x 4" Teardrop (Seismic) / 330 Bays x 5 Levels / $16-$19 per PP / FOB: Kentucky
26' x 42" x 96" x C3 Structural / 500 Bays x 5 Levels / $15-$18 per PP / FOB: Indiana
22' x 36" x 138" x 4.5" Teardrop / 2,200 Bays x 3 Levels / $8-$12 per PP / FOB: South Carolina
22' x 42" x 96" x 4" Teardrop / 450 Bays x 3 Levels / $12-$15 per PP / FOB: Kentucky
18' x 48" x 96" x 3" Keystone / 180 Bays x 5 Levels / $9-$12 per PP / FOB: North Carolina
Conveyor    2000' x 30" Power Rapistan / Live Roller, Incline, Curves / $15-$25 per Ft / FOB: Kentucky
1500' x 24" Power Automotion / 1.9" Accumulation at 30" zones / $20-$30 per Ft / FOB: Connecticut 2000' x 18" Power Metzger / 1.3" Line Shaft on 3" center / $8-$10 per Ft / FOB: North Carolina
2300' x 18" Gravity / 1.3" Roller on 4.5" center / $4-$6 per Ft / FOB: Kentucky
Pick Modules   3 Level x 2-Deep Pallet Flow / 288 Pallet Faces / $50 per PP / FOB: South Carolina
3 Level Carton Flow Pick Module / 8'x8' Shelves / call for price / FOB: Tennessee
2 Level Carton Flow Pick Module / 12'x5' Shelves / call for price / FOB: Georgia





10,780 pallet positions 4”  structural drive-in configured 2+2 @30’ tall for 40” x 48” pallet. 52” opening between uprights                $30.00p.p.

Optical Disk Tester Ono Sokki LM-1200 nice unit DVD,CD,MD $25000


UPS Work station 7’ tall 6’ wide and 27” deep with monitor trays and 3 adj. shelves  $1200

Steel Case 5’ tall cubicles 20 of them with all the files, desk and sides plus high end chairs. $5000 for all

Label heads, LSI 300 ($2000)   
Markem 300 LH ($ 2500) 
Universal UPAII B443 Sato M8485se ($2000)

Adjustable speed conveyor from 6” wide to 34” wide. 6’ long 8’ and 20’ long with adjustable speed controls all in good condition $1200 each


Work benches by Islile 5’x30”x30” with riser and elc. $150 each (10 left)


Call your rep for updates on the offerings. They can change daily on some items.  


Frazier Structural Pallet Rack 26' x 42" x 96" wide
26' Structural Rack
Used 26' Structural Rack

ITEM DESCRIPTION (Quantities approximated)
500 - Structural C3 Upright 26' x 42” .......[$ 69.00]
4800 - Structural C3 Beam 96" (4,600#) ....[$ 10.00]
660 - Row Spacer 12"...........................[$ 1.00]
360 - Wire Deck (flanged) 46" x 42".........[$ 7.00]
40 - End of Row Guard (Single)..............[$ 25.00]
(Ships in truckloads only) Northern Indiana, dismantled and ready to ship.

Select the region to find your rep.


Southeast US – Quincy Randolph -678-656-3966


Northeast US – Doug Cunnien – 651-770-1773


Midwest US – Robert Wester – 501-766-1018


West US – Sam Kelley – 501-231-2896


Outside US – Quincy Randolph – 678-656-3966 (esp.)
Or – Sam Kelley 501-231-2896






   

Equipment or services needed




Pallet Rack Updated 10/27/09

Pallet Rack

160 bays of 16’ tall 44-48 deep with 1060 96” beams (light duty) and decks. 

220 ea. 42" x 144"h teardrop 3x3 Upright 1092 ea. 144" x 6” (~6,000# cap) 1638 ea. wire deck 42" x 46"

300 beams Only 96x 7000 lbs quick ship offers only

202 uprights 192x42 1280 beams 108x5000lbs

1200 light duty 144s new style Interlake



Conveyor

20 powered bestflex conveyors 24”x24’

50’ of Accumulation Pallet Conveyor 48-50” 2500lbs

300 feet of 24” with 3 drives and 2 180 curves and two pop wheels

Looking for dealers to sell new conveyor from china

4 level 20+ bay pallet flow module.

Glaypacs or other extenders in and out loader



Other Equipment

Chilled over wrapper for Oreo size cookie. 50 a min

1- 50 hp compressor

12 Raymond or remstar carousel horz 50 to 70 long







Other Equipment
Chilled over wrapper for Oreo size cookie. 50 a min
1- 50 hp compressor
2 transverse Stewart Glapots 80’ long
Carousels horz and verts. White or remstar
12 Raymond or remstar carousel horz 50 to 70 long


Needed
Packaging mech that can up Label systems together using used and new equipment.
Install crew and leader for LA CA project  Installing 200 bays of rack and 15 bays of carton flow
North east crew to de-stall equipment from Boston project. Traders and buyers get front of line.
Ohio des-stall crew to remove 7000 feet of conveyor for scrap .    
Equipment to sell in our eBay store.
Add yours today by emailing your rep. This is a free service
Why?
We need equipment and hope to sell equipment all of the time. This sheet will give us one more way to find, sell, buy, install and de-stall equipment with other groups that need us or want to work with us.
Our email list is over 2000 strong. Dealers , end users , brokers, and service companies . Send us your listing today so we can include it quickly in the next mailing. Thank you Sam

 


 Call Sam Kelley—501-231-2896
Call Doug Cunnien – 651-770-1773